Compaq ProLiant ML350 Setup And Installation Manual page 52

3-20 Compaq ProLiant ML350 Setup and Installation Guide
2. Disconnect the power cable and data cable from the back of the tape
drive.
Figure 3-22. Disconnecting the tape drive cables
3. While pushing the drivelock
Figure 3-23. Releasing the tape drive
4. Remove the guide screws on the sides of the drive.
5. Install a hard drive blank into the empty drive bay.
6. Reinstall the access panel.
For use with 1-GHz or greater Intel Pentium III processor-based server models only
up, pull the drive


2
1
out of the drive bay.