Compaq ProLiant ML350 Setup And Installation Manual page 89

Server Configuration and Utilities 5-5
System Passwords
The System Passwords menu is used to set up passwords to limit access to the
system and its setup options. The following is a list of selections found in this
menu with an explanation of each option:
Setup Password allows a setup password to be set. This password is used to
keep unauthorized users from modifying the setup options.
Power-On Password allows a power-on password to be set. This password is
used to keep unauthorized users from powering on the system.
Network Server Mode allows the user to disable or enable the ability to start
the system with a locked keyboard or without a keyboard. The keyboard is
unlocked by entering the Power-On Password.
System Identification
The System Identification menu is used to identify the system.
Asset Tag allows the user to identify the system with an Asset Tracking
Number.
Advanced Options
The Advanced Options menu is used to configure advanced options of the
system. The following is a list of selections found in this menu with an
explanation of each option:
MPS Table Mode allows the user to change the APIC table setting. This
selection should be automatically set by OS Selection, but it allows the user to
override the automatic selection.
Post Speed Up allows the user to enable or disable the quick or slow start
process. The slow start process performs a complete memory test.
Automatic Server Recovery allows the user to enable or disable the
Automatic Server Recovery option.
Wake Support (PME) allows the user to enable or disable Wake
Support (PME).
Floppy Controller allows the user to enable or disable the floppy controller.
Primary IDE Controller allows the user to enable or disable the primary IDE
controller.
For use with 1-GHz or greater Intel Pentium III processor-based server models only