Compaq ProLiant ML350 Setup And Installation Manual page 110

D
DAT tape drive, bays supported
in 1-5
data back up 3-1
device installation mounted inside
5.25-inch drive adapter,
illustrated 3-17
diagnostic tools, configuring and
managing server with 1-14
dimensions, drive bay 1-5
DIMM sockets location,
illustrated 3-27
DIMMs
guidelines 3-26
installation 3-28
illustrated 3-28
sequence 3-27
removing 3-29
removing, illustrated 3-29
sockets 3-27
specifications 3-26
technical information 3-26
disk controller, features 1-8
diskette builder
operating systems 5-8
running 5-8
drive bay dimensions 1-5, 3-6
drive cable connections,
illustrated 3-17, 3-19
drive cage door removal,
illustrated 3-9
drive dimensions, illustrated 1-5,
3-6
drives, installing non-hot-plug 3-9
drives, removing illustrated 3-12
For use with 1-GHz or greater Intel Pentium III processor-based server models only
E
ejector lever
closing, illustrated 3-14
opening, illustrated 3-13
electric shock symbol viii
electrostatic discharge See ESD
ESD
damage caused by B-1
parts
handling B-1
sorting B-1
transporting B-1
precautions B-1
warning 3-1
European Union Notice A-4
exclamation point symbol viii
expansion board
installation 3-22
installation, illustrated 3-24
removal 3-37
expansion board retainer
reinstallation, illustrated 3-25
expansion board retainer removal,
illustrated 3-22
expansion slot cover removal,
illustrated 3-23
expansion slots
locating, illustrated 3-21
location 3-21
number 1-8
physical location 3-21
server 1-8
Index 3