Compaq ProLiant ML350 Setup And Installation Manual page 111

4 Compaq ProLiant ML350 Setup and Installation Guide
F
FCC
cable requirements A-3
Class A devices A-1
Class A notice A-2
Class B devices A-1
Class B notice A-2
compliance information A-3
equipment modification A-3
Mouse Compliance
Statement A-7
notices A-1
Rules and Regulations A-1
features
server 1-1
standard hardware 1-2
Federal Communications
Commission Notice A-1
front panel components,
illustrated 1-3
G
grounding methods B-1, B-2
guide screws
illustrated 3-7
installing 3-7
location 3-7
size and color 3-7
guidelines
cabling 4-1
SCSI devices 4-1
H
hard drive blank, removing
illustrated 3-13
hard drive cables, disconnecting,
illustrated 3-11
For use with 1-GHz or greater Intel Pentium III processor-based server models only
hard drives
installation 3-9, 3-13
installation, illustrated 3-10
installing 3-15
number supported 1-5
removal 3-11
Smart Array controller
connection, illustrated 4-9
hardware features
BIOS 1-9
disk controller 1-8
drive dimensions 1-5
expansion slots 1-8
feature board
components 1-10
front panel components 1-3
network interface
controller 1-9
ports/connectors 1-9
processors and system
memory 1-8
rear panel connectors 1-4
system board components 1-6
hardware installation
DIMMs 3-28
expansion board 3-22
hot-plug hard drive 3-13
PPM 3-33
removing access panel 3-3
SCSI hard drives,
guidelines 3-8
second PPM 3-30
second processor 3-30
storage devices 3-6
tape drive 3-18
hardware removal
bezel 3-2
removable media device
blanks 3-5
hazard symbol viii
hazardous conditions, symbols on
equipment viii