Compaq ProLiant ML350 Setup And Installation Manual page 64

3-32 Compaq ProLiant ML350 Setup and Installation Guide
3. Place the processor
IMPORTANT: The small triangular directional marker should be in the upper left corner of
the chip.
4. Lower the lever

5. Secure the heatsink retainer clip
6. Secure the opposite side of the heatsink retainer clip to the hook on the
opposite side of the processor
Figure 3-33. Installing the second processor
7. Install the PPMs before powering up the server. See "Installing a
Second Processor Power Module (PPM)" later in this chapter.
For use with 1-GHz or greater Intel Pentium III processor-based server models only
into the processor socket.


to lock the processor unit into place.
to the hook on the processor.

3
1
2