Compaq ProLiant ML350 Setup And Installation Manual page 44

3-12 Compaq ProLiant ML350 Setup and Installation Guide
3. Press inward on the release tab
drive bay.
1
Figure 3-13. Removing a non-hot-plug hard drive from a non-hot-plug drive
bay
4. Remove the two guide screws from each side of the drive.
5. Install a hard drive blank into the empty drive bay.
6. Reinstall the access panel.
For use with 1-GHz or greater Intel Pentium III processor-based server models only
and gently pull the drive


2
out of the