JVC VN-H37U Instructions Manual page 94

Operations
Built-in Viewer Operations
(continued)
PTZ Settings (continued)
A
Preset Position
Position
Title
B
Pan / Tilt / Zoom
C
Speed
94
Sets the camera preset position.
Selects a Position.
[Set values: HOME, 1 to 19]
Displays the current title.
To register or change the title, enter a title here.
(The title can be entered using up to 32 alphanumeric characters or up to
16 dual-byte characters.)
Press the [Register] button, and the new position will be registered.
Memo:
● Press the [Unregister] button to delete the current position information.
Note that you cannot delete the [Home] position.
● The home position is displayed in the full-screen area by factory
default.
Pan/Tilt operation
Press any arrow button to move the display area in its direction. When you
release the button, the movement stops.
Press the [H] button to return to the "Home position".
Memo:
● When the zoom is x1, Pan and Tilt cannot be operated.
Zooming
Increases or decreases the display area by digital zooming.
Zoom can be operated from x1 to x8.
[+]:Zooms in and enlarges an object.
[–]:Zooms out and reduces an object.
Scale display
Displays the current magnification.
Sets an operation speed.
Pan / Tilt: Controls the panning or tilting speed. A larger value increases the
panning/tilting speed.
[Set values: 1 to 4 to 8]
Zoom : Controls the zooming speed. A larger value increases the
zooming speed.
[Set values: 1 to 2 to 4]
* The [Set values] in bold letters are factory defaults.