JVC VN-H37U Instructions Manual page 62

Internet Explorer Setting
Settings (continued)
Access Restrictions Page (continued)
Client Address
A
Access
Restriction
B
IP Address
Note:
● If "Allow" is selected, but all IP address fields are left blank, retrieving H.264, JPEG or MPEG-4 by
all IP addresses will be denied.
An access to the Settings page is not restricted.
Additionally, the camera also denies transmission to an IP address if it is specified via API.
Memo:
● When you set a specific IP address range, enter a combination of IP address and subnet mask in
the [IP Address] field.
● Define the subnet mask using a length between 8 and 30 bits.
For example, when you set the IP address range between "192.168.0.0" and "192.168.0.255", enter
"192.168.0.0/24" (IP-address/Subnet-mask-bit-length).
62
You can restrict a client to allow access to the camera using its IP address.
If "Deny" is selected, retrieving H.264, JPEG or MPEG-4 by the IP address
set in [IP Address] option will be denied. An access to the Settings page is
not restricted.
If "Allow" is selected, retrieving H.264, JPEG or MPEG-4 by the IP address
set in [IP Address] option will be permitted. An access to the Settings page is
not restricted.
[Set values: Deny, Allow]
Up to 10 blocked or permitted client IP addresses can be registered.