JVC VN-H37U Instructions Manual page 92

Operations
Built-in Viewer Operations
(continued)
Picture Quality Setting (continued)
D
Focus Assist Mode Switches to the Focus Assist mode.
92
Press the [Execute] button, and the [Current State] will be changed to
[Focus Assist] and the Focus Assist mode will be selected. The [Stop]
button is displayed during Focus Assist mode.
Press the [Stop] button, and the [Current State] will return to [Normal] and
the Focus Assist mode will be released.
Memo:
● The camera enters the Focus Assist mode and the [STATUS] indicator
blinks green and orange alternately. When the Focus Assist mode is
released, the [Status] indicator lights up in green.
● The Focus Assist mode is released after three minutes if it is not used.
* The [Set values] in bold letters are factory defaults.