JVC VN-H37U Instructions Manual page 15

A
Camera ID
B
Lens Type
(VN-H37U only)
C
Scenefile
Text entered here will be written in the H.264 header and the JPEG comment
segment (item name: camera). It links to the [Camera ID] of the [Camera]
page. (A Page 18)
Memo:
● Refer to the "API Guide" on the file formats of JPEG.
1 (TAMRON): Select this type to use a Tamron lens.
2 (FUJNON): Select this type to use a Fujinon lens.
[Set values: 1 (TAMRON), 2 (FUJNON)]
You can select the setting that is suitable for the shooting scene. You can
select the following eight scenes. You can customize the settings (except
Camera ID) stored in "Scenefile". For details, see the [Camera] page. (A Page
18)
General : General location
Indoor : Place with indoor lighting
Outdoor : For shooting the subject in sunlit conditions
CLVI : Uses the fog removal function. (A Page 23) This can help
increase visibility in environments where there is a large
difference between lighted and shaded areas, or in environments
where contrast is low due to fog, etc.
Traffic : For shooting a subject that moves at high speeds, for example,
during road surveillance.
DataSaving: Data can be saved for VBR or VFS coding using noise
suppression. For details, see "Encoding" (A Page 24).
Day (Color): Always shoots in color. This setting is used for shooting in bright
locations such as under in sunlit areas during the day.
Night (B&W): Always shoots in black and white. This setting is used for
shooting in dark locations such as at night or when the object is
illuminated by infrared light.
[Set values: General, Indoor, Outdoor, CLVI, Traffic, DataSaving, Day
(Color), Night (B&W)]
Memo:
● Select "Day (Color) or "Night (B&W)" when you switch the Color or B&W
using an alarm trigger. For details, see the [Alarm] page. (A Page 32)
* The [Set values] in bold letters are factory defaults.
15