JVC VN-H37U Instructions Manual page 37

A
Mail Settings (continued)
SMTP Server
Port Number
Send Mail Address
To enable [POP before SMTP], select AEnableB and set up the POP server.
POP
before
[Set values: Disable, On]
SMTP
POP
Server
Port
Number
User
Name
Password
Sets an IP address of SMTP server or FQDN.
[Factory default: 0.0.0.0]
Memo:
The FQDN (Fully Qualified Domain Name) is
the notation to specify the host name and domain name of TCP/IP
network without any omission.
For example, if the host name is "smtp" and the domain name is
"jvckenwood.com", its FQDN can be "smtp.jvckenwood.com". Dual-byte
characters are not allowed in the FQDN. When you set the FQDN,
configure the [DNS Server] on the [Network Basic] page as well.
(A Page 53)
Enters a port number.
[Set values: 1 to 25 to 65535]
Sets a sender's mail address.
Sets an IP address of POP server or FQDN.
[Factory default: 0.0.0.0]
Enters a port number.
[Set values: 1 to 110 to 65535]
Enters a user name.
Enters a password.
* The [Set values] in bold letters are factory defaults.
37