JVC VN-H37U Instructions Manual page 23

L
Day/Night
(VN-H37U and
VN-H237VPU only)
Color
Average: Peak
Black & White
Average: Peak
M
Back Light
Compensation
N
CLVI
Sets Day and Night.
Color : Switches to the color mode at all times.
Black and White: Removing the filter to cut infrared enables surveillance in
an environment with low luminance such as at night.
Auto Low : Switches to the black-and-white mode when the luminance
of the signal level of object is low.
Auto Mid : Switches to the black-and-white mode when the luminance
of the signal level of object is medium.
Auto High : Switches to the black-and-white mode when the luminance
of the signal level of object is high.
[Set values: Color, Black and White, Auto Low, Auto Mid, Auto High]
Memo:
● If the AGC is turned "OFF" and if "Auto Low", "Auto Mid" or "Auto High" is
selected, the AGC is automatically set to the "Mid" level.
Sets the peak photometry rate in color mode.
[Set values: 10:0, 9:1, 8:2, 7:3, 6:4, 5:5]
Sets the peak photometry rate in Black and White mode.
[Set values: 10:0, 9:1, 8:2, 7:3, 6:4, 5:5]
Selects the backlight compensation function. Enables unwanted light
sources to be excluded from the photometry area.
OFF : Disables backlight compensation.
Areas 1 to 4 : Select a photometry area from the four areas.
[Set values: OFF, Area 1, Area 2, Area 3, Area 4]
Photometry area Photometry area Photometry area Photometry area Photometry area
OFF Area 1
Memo:
● The backlight compensation area is not linked to digital PTZ (Pan, Tilt,
Zoom).
Select the fog removal function.
It is effective in reducing image blur which occurs when zooming in on an
object located at a distance or when shooting in foggy or dusty
environments.
Depending on the shooting conditions, it may be less effective or a noise
may appear in the image, but this is not a camera malfunction.
[Set values: ON, OFF]
Memo:
● CLVI is an abbreviation for Clear Logic Video Intelligence.
Area 2
* The [Set values] in bold letters are factory defaults.
Area 3 Area 4
23