JVC VN-H37U Instructions Manual page 100

Operations
Built-in Viewer Operations
(continued)
Multicast Setting (continued)
Image
A
Multicast IP
Address
B
Multicast Port
100
You can set up the IP address of the images from the camera and the
multicast port.
Press [Apply] to apply the changes.
You can change the multicast IP address.
[Factory default: 255.0.1.1]
You can change the multicast port number.
[Factory default: 49152]
Memo:
● For Multicast IP Address and Multicast Port specify the same value
as the one set on the [Multicast] page (A Page 59) for Destination
Address and Destination Port respectively.