Motion Detection Page - JVC VN-H37U Instructions Manual

Motion Detection Page

This page sets the motion detection.
This page can be used during access using AadminB or AoperatorB.
13 horizontal by 9 vertical block (For aspect ratio 4:3)
Click [Advanced Settings] and [Motion Detection].
15 horizontal by 9 vertical block (For aspect ratio 16:9)
Click [Advanced Settings] and [Motion Detection].
Memo:
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the value before the
change was made. If you press the [Cancel] button, other changed items will also be restored to the
values before the change was made.
● When camera images are acquired by the Built-in Viewer or another client and if this acquisition
exceeds the distribution capability of camera, the video images may not appear on the Motion Detection
page. When you use the Motion Detection page, turn the Built-in Viewer and another client Off.
● The area valid for motion detection is displayed in blue.
● When motion is detected, the area around the screen is highlighted in red.
49