JVC VN-H37U Instructions Manual page 18

Internet Explorer Setting
Settings (continued)
Camera Page (continued)
A
Camera ID
B
Scenefile
18
A character string entered here will be written to the JPEG comment
segment (item name: camera).
Memo:
● You can enter up to 40 characters consisting of alphabets (both upper
case and lower case), numerals, parentheses, commas, periods, spaces
and hyphens. Use the radio button [Japanese / English (Custom)] at the
right top corner of the setting page to select English (Custom).
● All characters entered in the JPEG comment segment will be saved, but
some characters may not be displayed when Camera ID is viewed with
the Built-in Viewer.
● Refer to the "API Guide" on the file formats of JPEG.
You can select the setting that is suitable for the shooting scene. You can
select the following eight scenes.
You can customize the [Camera] page settings (except Camera ID) stored in
"Scenefile".
General : General location
Indoor : Place with indoor lighting
Outdoor : For shooting the subject in sunlit conditions
CLVI : Uses the fog removal function. (A Page 23) This can help
increase visibility in environments where there is a large
difference between lighted and shaded areas, or in
environments where contrast is low due to fog, etc.
Traffic : For shooting a subject that moves at high speeds, for example,
during road surveillance.
DataSaving: Data can be saved for VBR or VFS coding using noise
suppression. For details, see "Encoding" (A Page 24).
Day (Color): Always shoots in color. This setting is used for shooting in bright
locations such as under in sunlit areas during the day.
Night (B&W): Always shoots in black and white. This setting is used for
shooting in dark locations such as at night or when the object is
illuminated by infrared light.
[Set values: General, Indoor, Outdoor, CLVI, Traffic, DataSaving, Day
(Color), Night (B&W)]
Memo:
● Select "Day (Color)" or "Night (B&W)" when you switch the Color or B&W
using an alarm trigger. For details, see the [Alarm] page. (VN-H37U,
VN-H237VPU) (A Page 32)
● If you press the [OK] button, the settings (except Camera ID) of the
[Camera] page will be store in the selected Scenefile.
● Press the [Initialize] button to restore the selected Scenefile to the factory
defaults.
* The [Set values] in bold letters are factory defaults.