C
Brightness
D
Color Level
E
Black Level
F
Gamma
G
Enhance Level
Adjusts the brightness of an image.
Increasing the value brightens dark areas, and decreasing the value makes
bright areas more pleasing to the eye.
[Set values:
5 to Normal to 5]
Adjusts the color level.
A larger value increases the darkness of color, but a smaller value
decreases the darkness of color.
[Set values:
5 to Normal to 5]
Adjusts the black level. Setting the value to "Low" darkens the video image.
[Set values: Low, Normal]
Memo:
● If the black level is set to ALowB, this may be too low depending on the
monitoring device, or dark area will become complete black.
● When using the Monitor Output or H.264 images, set it to "Normal".
To alter the appearance of dark areas in a video image, adjust the gamma
curve.
OFF
: Do not perform gamma correction. The entire image appears
dull.
ON
: Perform gamma correction.
[Set values: ON, OFF]
Sets the intensity of edge enhancement.
A larger value increases the intensity of edge enhancement, but a smaller
value decreases the intensity of edge enhancement.
[Set values:
5 to Normal to 8]
* The [Set values] in bold letters are factory defaults.
19