FIGURE 13.1 Removing/Installing - Adjusting Width
Adjusting Angle
NOTE: For this procedure, refer to FIGURE 13.2.
1. Lift-up the armrest.
2. Loosen the jam nut.
3. Adjust the socket screw up or down to the desired arm angle position.
4. Tighten the jam nut.
5. To determine the same angle for the opposite armrest, count the exposed threads after
the jam nut has been tightened.
6. Repeat STEPS 1-5 for opposite armrest, if necessary.
Angle
Armrest
Count Exposed Threads
Adjusting Height
NOTE: For this procedure, refer to FIGURE 13.2.
1. Remove the lock knob that secures the armrest to the arm frame assembly.
2. Adjust the armrest to one of five positions.
3. Reinstall the lock knob that secures the armrest to the arm frame assembly and tighten
securely.
Part No 1141449
Lock Knob
Arm Support
Tube
Socket Screw
Jam Nut
FIGURE 13.2 Adjusting Angle - Adjusting Height
Van Seat Arm
Height
Height
Adjustment
Holes
Lock Knob
53
SECTION 13—ARMS
Armrest
Arm Frame
Assembly
®
™
Pronto
M71
with SureStep
™