Adjusting Armrest Height (Following Armrest); Changing Resistance (Flip-Up/Following Armrest); Adjusting Arm Pad Angle; Armrest) - Invacare TDX SP2 Series User Manual

5.10.5 Adjusting Armrest Height (Following Armrest)

Tools:
• 5 mm Allen key
• 13 mm wrench
1. Loosen and remove screw A and nut B .
2. Adjust component to desired position.
3. Insert and tighten screw and nut.

5.10.6 Changing Resistance (Flip-Up/Following Armrest)

The movement of the flip-up and following armrests can be
set to have greater or less resistance.
1578997-J
Fig. 5-28
Tools:
• 5 mm Allen key
1. To make armrest easier to move, loosen screw A.
2. To make armrest more difficult to move, tighten screw
A.
5.10.7 Adjusting Arm Pad Angle (Flip-Up/Following

Armrest)

Tools:
• 5 mm Allen key
Fig. 5-29
Fig. 5-30
Setup
47