SECTION 10—SAFETY/HANDLING OF WHEELCHAIRS
Reaching and Bending - Backward
WARNING
DO NOT lean over the top of the back upholstery. This will change your center of
gravity and may cause you to tip over.
NOTE: For this procedure, refer to FIGURE 10.5.
Position wheelchair as close as possible to the desired object. Point the front AND rear
casters rearward to create the longest possible wheelbase. Reach back only as far as your
arm will extend without changing your sitting position.
FIGURE 10.5 Reaching and Bending - Backward
®
™
™
30
Pronto
M71
with SureStep
Part No 1141449