Connecting - Invacare Pronto M71 Owner's Operator And Maintenance Manual

SECTION 19—ELECTRONICS

Connecting

The joystick connector and controller connector fit together in one way only; DO
NOT force them together.
1. Perform one of the following:
A. On Wheelchair With SPJ Or SPJ+ Joystick - Hold the light GREY collar portion of
the joystick connector with one hand and the controller connector on the
wheelchair in the other and align them; then lightly push to engage the joystick
connector and the controller connector (DETAIL "A" of FIGURE 19.3).
B. On Wheelchair With SPJ-80, MPJ Or DPJ Joystick - Align the joystick connector
with the controller connector and secure using the thumb screws on the joystick
connector (DETAIL "B" of FIGURE 19.3).
DETAIL "A" - SPJ OR
SPJ+ JOYSTICKS
Light Grey
Collar
Joystick
Connector
NOTE: Only Van seat shown. Joysticks on ASBA seats also connect/disconnect the same way.
FIGURE 19.3 Disconnecting/Connecting the Joystick
® ™
Pronto M71 with SureStep
WARNING
Joystick
Controller
Connector
™ 96
Joystick
DETAIL "B" -
MPJ OR DPJ
JOYSTICKS
Thumb
Screws
Joystick Joystick
Connector Connector
Controller
Connector
Part No 1141449