®
Invacare
- Orion
7.3
Replacing wheel suspension
ATTENTION! Risk of accident.
Accidental rolling can lead to accidents.
· Secure the scooter against rolling away.
Note:
When disassembling, note the position of small parts such as screws and washers. Put small
parts down so that they can be reassembled in the right sequence.
Requirements:
· Open spanner, 10 mm.
· Open spanner, 12 mm.
· Open spanner, 13 mm.
· Open spanner, 32 mm.
· Phillips screwdriver
· Supporting wooden block
·
Remove the seat.
·
Remove motor cover.
·
Disconnect battery cable (1).
·
3-wheel version: Dismantle steering column
and chassis (see chapter entitled
"Replacing steering column/fork 3-
wheel" on page 28).
·
4-wheel version: Dismantle steering link and
steering rod (see chapter entitled
"Replacing steering linkage/steering rod
" on page 34).
SERVICE MANUAL
23