Invacare Orion Service Manual page 37

®
Invacare - Orion
·
Remove the bolt (7), nut and washers.
·
Remove the seat support tube (2) from the
receptacle tube (1).
·
Remove the concertina type cover (3)
including the spring (5) and the plastic end
pieces (4 and 6).
·
Fit the plastic end pieces (4 and 6) to the
new spring.
·
Grease the spring generously. The spring
should be covered completely.
·
Assemble the concertina type cover (3).
·
Install the concertina type cover (3) including
the spring (5) and the plastic end pieces (4
and 6).
·
Insert the seat support tube (2) into the
receptacle tube (1) and press down gently.
·
Reposition the bolt (7), nut and washers.
·
Firmly tighten the seat support bolt.
·
Reposition the seat.
SERVICE MANUAL
37