Replacing Bend Speed Reducer - Invacare Orion Service Manual

SERVICE MANUAL
7.12

Replacing bend speed reducer

ATTENTION! Risk of accident.
Accidental rolling can lead to accidents.
· Secure the scooter against rolling away.
Note:
When disassembling, note the position of small parts such as screws and washers. Put small
parts down so that they can be reassembled in the right sequence.
Requirements:
· Phillips screwdriver
· Open spanner, 32 mm.
·
Remove the seat.
·
Remove motor cover.
·
Separate battery cable.
·
Remove front and rear steering column
cladding, steering column and housing. (See
chapter entitled "Replacing steering
column").
Replacing sensors (5) without mounting:
·
Loosen screws.
·
Replace sensor.
Replacing sensors (5) with mounting:
·
Loosen fork bolt (1).
·
Replace sensors (5) with mounting:
Replacing regulating unit (4):
·
Loosen screws.
·
Remove sensor (5).
·
Loosen screws (3).
·
Replace regulating unit (4).
40
®
Invacare - Orion