Replacing Steering Linkage/Steering Rod - Invacare Orion Service Manual

SERVICE MANUAL
7.9

Replacing steering linkage/steering rod

ATTENTION! Risk of accident.
Accidental rolling can lead to accidents.
· Secure the scooter against rolling away.
Note:
When disassembling, note the position of small parts such as screws and washers. Put small
parts down so that they can be reassembled in the right sequence.
Requirements:
· Open spanner, 10 mm.
· Open spanner, 12 mm.
· Open spanner, 13 mm.
· Phillips screwdriver
· Circlip pliers
· Supporting wooden block
·
Remove the seat.
·
Remove motor cover.
·
Disconnect battery cable (1).
·
Dismantle the steering column and the
chassis. (See chapter entitled "Replacing
steering column/fork 3-wheel" on page
28)
34
®
Invacare - Orion