Replacing Wheel Suspension - Invacare Comet Service Manual

SERVICE MANUAL
7.3

Replacing wheel suspension

ATTENTION! Risk of accident.
Accidental rolling can lead to accidents.
· Secure the scooter against rolling away.
NOTE:
When disassembling, note the position of small parts such as screws and washers. Put small
parts down so that they can be reassembled in the right sequence.
Requirements:
· Open spanner, 32 mm.
· Phillips screwdriver
· Supporting wooden block
·
Remove the seat.
·
Remove motor cover.
·
Disconnect battery cable (1).
·
Dismantle chassis and steering column (see
chapter entitled "Replacing steering
column/fork 3-wheel" on page 30).
·
Dismantle steering linkage and steering rod
(see chapter entitled "Replacing steering
linkage/steering rod" on page 40 ").
·
Loosen wheel suspension screw (1).
·
Loosen knurled screw (2).
·
Replace wheel suspension
24
®
Invacare - Comet