6.3
Replacing wheel suspension
CAUTION! Accident hazard.
• Secure the scooter against rolling away.
NOTE:
When disassembling, note the position of small parts such as screws and washers. Put small
parts down so that they can be reassembled in the right sequence.
Requirements:
•
Open spanner, 32 mm.
•
Phillips screwdriver
•
Supporting wooden block
•
Remove the seat.
•
Remove motor cover.
•
Disconnect battery cable (1).
•
Dismantle chassis and steering column (see
chapter "Replacing steering column/forks).
•
Dismantle steering linkage and steering rod
(see chapter "Replacing steering
link/steering rod").
•
Loosen wheel suspension screw (1).
•
Loosen knurled screw (2).
•
Replace wheel suspension
22