Table of Contents
Advertisement
Using the network scanner features
7.3
Storage on the HDD-B
When you store the scanned data on the HDD-B, necessary procedures depend on whether or not the boxes
are registered in advance.
!
Detail
Refer to the following pages.
"When a box is already registered" on page 7-9
"When a box is not registered" on page 7-11
For more information of HDD-B to be used, refer to "About the HDD" on page 2-3.
When a box is already registered
1
Press [SCAN] on the touch panel.
The Select Destinations/Storage Locations screen appears.
2
Press the [HDD] key.
–
In the initial settings, the Select Destinations/Storage Locations screen (E-Mail) is displayed. For
information on the initial settings of the [SCAN] screen, contact your administrator of the copier.
3
Press the Name of the Box No.
–
You can refine the registered destination by the search function. For more information on how to
search, refer to "How to search" on page 3-8.
–
You can refine the Name by the search function. For more information on the search function, refer
to "The keys on the Select Destinations/Storage Locations screen" on page 7-3.
–
To deselect the Name, press the selected Name again.
–
If boxes are not registered, refer to "When a box is not registered" on page 7-11.
VarioLink 9522 (Version 2)
7
7-9
Advertisement
Table of Contents
