Table of Contents
Advertisement
5
5.5
Send to the SMB server
You can send the data read in from the copier's ADF or the original scanning glass (scanned data) to the SMB
server.
The scanned data sent to the SMB server can be file-shared with computers with the SMB protocol.
For detailed information on how to operate the function, refer to "Transmission to the SMB server" on
page 7-18.
5.5.1
Items to be configured
In order to send the scanned data to the SMB server, the following items need to be configured.
Host Address
You specify an SMB server name or an IP Address of the SMB server.
File Path
You specify a directory in the SMB server.
Login Name
You specify a Login Name for the SMB server.
Password
You specify a corresponding Password to each Login Name for the SMB server.
You can register a Host Address, File Path, Login Name and Password in advance. For information on how
to register them, refer to "Registering the SMB server" on page 6-13.
Reminder
Depending on a network condition, transmission to the SMB server may damage the scanned data.
Make sure that the scanned data are not damaged.
No transmission to the Scan to SMB is available only in the IPv6 environment. A transmission can be
made in the mixed environment of IPv4 and IPv6.
5-8
Original
SCAN
Copier
About the network scanner features
SMB server
Internet
VarioLink 9522 (Version 2)
Advertisement
Table of Contents
