Table of Contents
Advertisement
Configuring destination for the network scanner features
6.2
Manual destination input registering an E-Mail address
When using the function to send the scanned data as an E-Mail attached file, you can register the destination
E-Mail address in advance. The registration is done in the following steps.
!
Detail
For E-Mail/FTP/HDD/SMB, destinations can be registered as many as 500 in sum.
Refer to "LDAP Search" on page 3-13 for the method of registering the address searched with the
LDAP search function.
1
Press [SCAN] tab on the touch panel.
The Select Destinations/Storage Locations screen appears.
2
Make sure that [E-Mail] is selected.
–
In the initial settings, the Select Destinations/Storage Locations screen (E-Mail) is displayed. For
information on the initial settings of the Scan screen, contact your administrator of the copier.
–
If the E-Mail address is already registered, the Name is displayed.
–
In the initial settings, such index keys as [A-C] and [D-F] are displayed.
–
On how to edit/delete a registered address, contact your administrator of the copier.
3
Press the [Manual Destination Input] key.
The Destination Manual Input screen appears.
VarioLink 9522 (Version 2)
6
6-5
Advertisement
Table of Contents
