Table of Contents
Advertisement
Using the network scanner features
7.4
Transmission to the FTP server
When you send the scanned data to an FTP server, necessary procedures depend on whether the FTP server
is registered in advance or it is input manually.
!
Detail
Refer to the following pages.
"When an FTP server is already registered" on page 7-13
"When an FTP server is input manually" on page 7-16
When an FTP server is already registered
1
Press [SCAN] on the touch panel.
The Select Destinations/Storage Locations screen appears.
2
Press the [FTP] key.
–
In the initial settings, the Select Destinations/Storage Locations screen (E-Mail) is displayed. For
information on the initial settings of the Scan tab, contact your administrator of the copier.
3
If you need to change the Port No., press the [Port No.] key. If unnecessary, go to the step 5.
VarioLink 9522 (Version 2)
7
7-13
Advertisement
Table of Contents
