Table of Contents
Advertisement
7
7.5
Transmission to the SMB server
When you send the scanned data to an SMB server, necessary procedures depend on whether the SMB
server is registered in advance or it is input manually.
!
Detail
Refer to the following pages.
"When an SMB server is already registered" on page 7-18
"When an SMB server is input manually" on page 7-20
When an SMB server is already registered
1
Press [SCAN] on the touch panel.
The Select Destinations/Storage Locations screen appears.
2
Press the [SMB] key.
–
In the initial settings, the Select Destinations/Storage Locations screen (E-Mail) is displayed. For
information on the initial settings of the Scan tab, contact your administrator of the copier.
3
Press the Name of the destination SMB server.
–
You can refine the registered destination by the search function. For more information on how to
search, refer to "How to search" on page 3-8.
–
You can refine the Name by the search function. For more information on the search function, refer
to "The keys on the Select Destinations/Storage Locations screen" on page 7-3.
–
To deselect the Name, press the selected Name again.
–
If you input a destination manually, refer to "When an SMB server is input manually" on page 7-20.
7-18
Using the network scanner features
VarioLink 9522 (Version 2)
Advertisement
Table of Contents
