Table of Contents
Advertisement
About the STORE/RECALL functions of the copied data
4.10
About Output Setting screen of the RECALL function
On the Output Setting screen of the RECALL function, you can configure the settings for outputting stored
copied data or secure output print jobs.
!
Detail
On how to open the setting screen, refer to "Output from the HDD-A" on page 4-33.
4.10.1
Keys on the setting screen
Button
File Check
Thumbnail
File Combination
ImageCombination
File Delete
Clear All
Wait
Proof
Auto
VarioLink 9522 (Version 2)
Function
Pressing this key displays a list of settings of the selected file.
Pressing this key displays a thumbnail of the selected file. For more information of
Thumbnail, refer to "Thumbnail" on page 3-17.
You can output all the selected files at once. At maximum, you can combine 5 files
at one time.
You can output images of all the selected files at once. At maximum, you can
combine 5 files at one time.
Pressing this key deletes the selected file. On the confirmation screen, press the
[Yes] key to delete the file.
Reset all the output settings.
After recalling data, the [Machine] screen appears. You can change the setting.
For more information, refer to "The flow of operation of the Wait Output" on
page 4-38.
When a number of copies are printed, the [Machine] screen appears after printing
one copy. If you see no problem, press the start button to restart the output. For
more information, refer to "The flow of operation of the Wait Output" on
page 4-38.
If this key is pressed, the output starts without pressing the start button.
4
4-37
Advertisement
Table of Contents
