3. Insert the power connector from the power supply in the power port on the side of
the cradle.
Connecting the VCD 7500 Vehicle Cradle a Host Computer
1. Plug a 9-pin serial cable into the communication port located next to the power port
on the side of the cradle.
Serial
Communication Port
2. Connect the other end of the cable to the serial (COM) port of the host computer.
Figure 3-7. Power Connector: VCD 7500 Cradle
Figure 3-8. Serial Connector: VCD 7500 Cradle
Power Port
Cradle Setup and Operation
3-9