Symbol-Supplied Utilities - Symbol PDT 7500 Series Product Reference Manual

PDT 7500 Series Product Reference Guide for DOS
• Spectrum24 ODI
The Spectrum24 ODI drivers provided by Symbol consist of Novell's Link Support Layer
(LSL), Novell's TCP/IP, and Symbol's Multiple Link Interface Driver (MLID) layers. These
executables are part of the Spectrum24 NDK for DOS.
• LSL.COM
The LSL manages communications between TCP/IP protocol stack and SL8ODIOS. This
layer is a component of the Novell Open DataLink Interface (ODI) driver specification.
• TCPIP.EXE
This is Novell's TCP/IP Multiple Protocol Interface (MPI). It supports the Berkeley socket
APIs. This layer is a component of the ODI driver specification.
• SL8ODIOS.COM
This is the Spectrum24 MLID Network Driver. The MLID layer controls a specific network
interface and works below the LSL. The MLID manages the transmission and reception of
packets to and from a physical or logical network interface. This layer is a component of the
ODI driver specification.

Symbol-Supplied Utilities

• PDTSET.EXE
A utility that allows various system settings to be altered from AUTOEXEC.BAT. This utility
is provided with the source code and an abstract explaining its use in the DOSSAMP\PDTSET
directory.
• PDTCHECK.EXE
A utility that allows various system conditions to be tested (e.g., trigger, pen, drive letter
presence, display size, etc.). This utility is provided with the source code and an abstract
explaining its use in the DOSSAMP\PPTCHECK directory.
CardSoft is supplied with the Symbol Series 7000 SDK as a series of drivers which are loaded
in CONFIG.SYS:
'(9,&(+,*+ DWDGUYH[H
ATADRV.EXE
5-10