Symbol PDT 7500 Series Product Reference Manual page 71

Terminal Configuration: Edit the Configuration Files
POWER.EXE can be used on the PDT 7500, it cannot be used in conjunction with
POWER7XT.EXE, and does not provide as efficient a power management.
POWER7XT.EXE requires that XBIOS7XT.EXE is loaded first and will not load unless one
of these two files is present. When used on the development PC with XBIOS7XT.EXE, this
TSR can be used for testing power management functionality of an application on the
development PC.
• XBIOS7XT.EXE
This TSR provides extended BIOS-level functionality specific to Series 7000 features.
XBIOS7XT.EXE can be loaded on the development PC or the Series 7000 terminal for use in
testing and debugging Series 7000 applications on the development PC.
• MOUSE7XT.EXE
The Mouse TSR API provides Microsoft Mouse-compatible use to support the use of the pen
and digitizer as a mouse. Mouse-aware applications can use this TSR to provide mouse
emulation.
• SCN1DQST.EXE and SCN2DQST.EXE
The DOS Scanner API provides one- and two-dimensional bar code scanning support and
supplies an API for controlling scanning from an application. These TSRs require the
presence of POWER7XT.EXE and XBIOS7XT.EXE to load. Additionally, these drivers
require the presence of Series 7000-specific hardware, and cannot be loaded on the
development PC (even if XBIOS7XT.EXE is loaded).
• WARMBEEP.EXE
This application, when loaded on the terminal, causes an audible beep to sound when the
defined warm boot time has expired. This is to assist the user in understanding the time when
a warm boot occurs. See the Series 7000 System Software Manual for DOS Applications for
more information.
CardSoft
• CS_APM
A TSR that must be loaded to utilize advanced power management functions for CardSoft.
This TSR can also be installed in CONFIG.SYS with the CardSoft drivers using the Install
command.
Note: Do NOT load CS_APM in CONFIG.SYS and AUTOEXEC.BAT.
5-9