After adjusting all the settings on this screen, press the left arrow on the terminal's keypad to
move to the next setup screen.
This screen displays the size of the Ram and Flash disks. These are read-only fields, provided
for reference only.
After reviewing the Ram and Flash Disk sizes, press the right arrow on the terminal's keypad
to display the final setup screen.
On this screen, you have three options:
Save and Exit
Exit without Saving
Load Defaults and Exit Resets all fields on the setup screens to their default values and exits the
Ram Size
[7803 KB]
Flash Size [8192 KB]
Figure 8-4. Setup Screen #4
Save and Exit
Exit without Saving
Load Defaults and Exit
Figure 8-5. Setup Screen #5
Saves the current settings in all fields on the setup screens and exits the setup
program. If selected, the terminal reboots.
Exits the setup program without saving any of the changes you have made
to the fields on the setup screens. If selected, the terminal reboots.
setup program. If selected, the terminal reboots.
Terminal Configuration: Setup
8-7