Building The Image - Symbol PDT 7500 Series Product Reference Manual

PDT 7500 Series Product Reference Guide for DOS
Note: If you open and make changes to an existing script, saving the changes
writes over the existing script.
If you wish to use an original or Symbol-supplied standard script as a base and save the
changes in a new script, use Save As instead of Save after making the changes.

Building the Image

As part of the build, TCM performs a check on the script which verifies that all files
referenced in the script exist. If the image is bootable, TCM verifies that the boot files are
available.
Note: Performing a check is more important for previously existing scripts
to ensure that files referenced in the script are still in the designated
locations.
To check a script:
1. In the Script Window, select the script.
2. Save the script, if not already saved.
3. From the Script Menu, choose Check.
OR
On the toolbar, choose
4. TCM verifies that files referenced in the script exist on available drives and lists an
error message in the Errors found box for any missing files.
5. Choose the OK button to exit.
6-10
.