Symbol PDT 7500 Series Product Reference Manual page 92

PDT 7500 Series Product Reference Guide for DOS
4. After selecting the area, press Enter. IPL checks for the presence of external power. If
the system is running off battery power, IPL displays the Connect to Power Screen:
5. Place the terminal in the cradle or connect the external power supply and serial
connection. IPL waits at this screen until external power is supplied. If the terminal
is already running from external power, this screen does not display. While this
screen is displayed, pressing Enter or the Cursor Up/Down keys on the keyboard
returns IPL to the Area Selection screen.
6. After the power and serial connections are made, select 'Multiple Images' from the
main IPL page and the following screen displays:
Note: If a cradle is the input source, serial parameters are fixed at 38400
baud, no parity, 8 data bits, and 1 stop bit. These parameters cannot
be changed.
The second and fourth lines of this screen reflect the selections made on the Area Selection
and Baud Rate menus, respectively. This screen continues to display until the first character
of the image to be downloaded is received from the host. While this screen is displayed,
pressing the Enter or Cursor Up/Down keys on the keyboard returns IPL to the Area Selection
screen.
As soon as the first character of data is received, IPL displays the receiving screen:
6-18
Insert in Cradle
Or
Connect Power Supply
Waiting for data
Multiple Images
115200
Multiple Images
Pages to Erase
Pages to Receive
Page to Write