Symbol PDT 7500 Series Product Reference Manual page 91

for 16 seconds. Both methods have the same effect, but selecting "Run
System" is faster.
Once the selection is made, IPL proceeds to the Area Selection Menu.
3. Use the up and down cursor keys or the up and down arrows on the touch screen to
select the area to be received. You have the following options on this screen:
Prev. Menu
Single Image
Multiple Images
(default selection)
BIOS
Disks 1 - 4
EXEC
Terminal Configuration: Build and Send the Hex Image
IPL
Prev. Menu
Single Image
Multiple Images
BIOS
Disk 1
Disk 2
Disk 3
Disk 4
EXEC
SETUP
IPL
Partition Map
Returns you to the Baud Rate menu to modify the baud rate.
Indicates that a single image is to be received, without specifying the area
to be received.
Indicates that more than one area is to be received contiguously. Note:
TCM must be set up to respond to RTS/CTS handshaking. See Sending
the Hex Image on page 6-12 for more information on this setting in
TCM.
Indicates that a new BIOS is to be received.
Indicates the specific disk volume(s) to be received.
For factory diagnostic use only.
Ver 1.0
6-17