Audio Menu - InFocus IN5132 User Manual

AUDIO menu

From the AUDIO menu, you can perform the items
shown in the table below. Select an item using the ▲/▼
cursor buttons, and press the ► cursor button or the
ENTER button to perform this item. Then follow the
instructions below.
Item
VOLUME
SPEAKER
AUDIO SOURCE
(continued on next page)
Using the ◄/► buttons adjusts the volume.
Low ó High
Using the ▲/▼ buttons turns on/off the built-in speaker.
ON ó OFF
When OFF is selected, the built-in speaker does not work.
While the image signal from the input port chosen in step (1) is
projected, the audio signal from the input port selected in step
(2) is output to both the AUDIO OUT port and built-in speaker of
this projector. However, the built-in speaker does not work when
SPEAKER is OFF.
(1) Choose a picture input port using the
▲/▼ buttons.
Choose AUDIO OUT STANDBY to
select the sound output in the standby
mode.
(2) Select an audio input port or the mute
icon using the ◄/► buttons.
The icons indicate the following;
No.1: AUDIO IN1 port
No.3: AUDIO IN3 ports
No.5: USB TYPE A ports
No.7: HDMI 1 port
: mutes the sound
• Audio input from port nos.4 to 8 can only be selected by each of
the picture input ports.
• C.C. (Closed Caption) is automatically activated when
and an input signal containing C.C. is received. This function is
only available when the signal is NTSC for VIDEO or S-VIDEO, or
480i@60 for COMPONENT, COMPUTER IN1 or COMPUTER IN2,
and when AUTO is selected for DISPLAY in the C.C. menu under the
SCREEN menu (64).
Description
No.2: AUDIO IN2 port
No.4: LAN port
No.6: USB TYPE B port
No.8: HDMI 2 port
AUDIO menu
is selected
57