Using the menu function
This projector has the following menus:
PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK,
SECURITY and EASY MENU.
EASY MENU consists of functions often used, and the other menus are classified
into each purpose and brought together as the ADVANCED MENU.
Each of these menus is operated using the same methods. When the projector is
displaying the menu system, the projector's MENU button acts as a cursor button.
Basic menu operations are described below.
ENTER button
RESET button
ESC button
1.
To start the MENU, press the MENU button. EASY MENU will appear just
after the projector is powered on, otherwise the MENU you last used (EASY
or ADVANCED) will appear
2.
In the EASY MENU
(1) Use the ▲/▼ cursor buttons to select an item
to operate. If you want to make changes in the
ADVANCED MENU, select the ADVANCED MENU.
(2) Use the ◄/► cursor buttons to operate the item.
In the ADVANCED MENU
(1) Use the ▲/▼ cursor buttons to select a menu.
If you want to change make changes in the EASY
MENU, select the EASY MENU.
The items in the menu appear on the right side.
(2) Press the ► cursor button or the ENTER button to
move the cursor to the right side. Then use the
▲/▼ cursor buttons to select an item to operate and press the ► cursor
button or the ENTER button to progress. The operation menu or dialog of
the selected item will appear.
(3) Use the buttons as instructed in the OSD to operate the item.
(continued on next page)
Cursor buttons
MENU
button
INPUT
button
Operating
39