InFocus IN5132 User Manual page 23

Displaying the log (continued)
NOTE
• The Status Monitor and its backlight will return to its previous state
when any button (except the cursor buttons) is pressed and when no buttons
are pressed for 30 seconds.
• The projector usage time is the amount of time the projector lamp has been
on since the projector was manufactured. LAMP TIME in the OPTION menu
(67) does not reset this timer.
• If the ▲/▼ buttons are pressed while the usage time is displayed, the usage
time switches to the previous time when an error occurred.
 To display error history
Press the ▲ button to display the previous
error log. If a warning has been displayed, the
first previous error log will be current error.
The Status Monitor displays the log number,
the error that occurred, and the supplied
voltage and peripheral temperature at that
time. Press the ► button to display the time
when each error occurred.
Use the ▲/▼ buttons to change the
log. The display switches with the
◄/► buttons to each log. Up to 10
error logs including the present one
can be displayed.
NOTE
• The Status Monitor and its backlight will return to its previous state
when any button (except the cursor buttons) is pressed and when no buttons
are pressed for 30 seconds.
• When less than 10 errors have occurred, "NO DATA" will display regardless of
the fact that an error is visible in the error log.
Status Monitor <Only for IN5142, IN5144, IN5144a and IN5145>
Log number
1 P R E V I O U S
7 F I L T E R E R R O
A C 2 4 0 V 3 5 ° C
Error log (example)
Error log1
First display
Error log10
Error
Usage time
(error log1)
Usage time
(current)
Usage time
(error log10)
23