Selecting An Input Signal - InFocus IN5132 User Manual

Operating

Selecting an input signal

1.
Press the INPUT button on the projector.
Each time you press the button, the projector
switches its input port from the current port as per
below.
COMPUTER IN1  COMPUTER IN2  LAN
VIDEO
S-VIDEO
COMPONENT  HDMI 2  HDMI 1
NOTE
• If some ports have been skipped in SOURCE SKIP of the OPTION
menu, those input ports cannot be selected (65).
• When AUTO SEARCH in the OPTION menu is ON, the projector will keep
checking the ports sequentially until an input signal is detected (65).
• It may take several seconds to project images from the USB TYPE B port.
1.
Press the COMPUTER 1 / 2, LAN, USB TYPE A / B, HDMI 1 / 2,
COMPONENT, S-VIDEO or VIDEO button on the remote control.
The port corresponding to each button is selected as per below.
Button
COMPUTER 1
COMPUTER 2
LAN
USB TYPE A
USB TYPE B
HDMI 1
HDMI 2
COMPONENT
S-VIDEO
VIDEO
NOTE
• While ON is selected for AUTO SEARCH item in OPTION menu,
the projector will keep checking every port sequentially until an input signal is
detected (65).
• It may take several seconds to project images from the USB TYPE B port.
26
USB TYPE A
USB TYPE B
Ports
COMPUTER IN1
COMPUTER IN2
LAN
USB TYPE A
USB TYPE B
HDMI 1
HDMI 2
COMPONENT
S-VIDEO
VIDEO
INPUT button
Buttons for input
ports