Input Menu - InFocus IN5132 User Manual

INPUT menu

INPUT menu
From the INPUT menu, you can perform the items
shown in the table below.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or the ENTER button to
perform this item. Then follow the instructions below.
Item
PROGRESSIVE
VIDEO NR
COLOR SPACE
COMPONENT
(continued on next page)
50
Using the ▲/▼ buttons switches the progress mode.
TV ó FILM ó OFF
• This function only works for composite, s-video, component and
TM
HDMI signals (of 480i@60 or 576i@50 or 1080i@50/60).
• When TV or FILM is selected, the screen image will be sharp.
FILM adapts to the 2-3 Pull-Down conversion system, but may
cause certain image defects (for example, jagged line) when
viewing quick moving objects. In this case, select OFF, even though
the screen image may lose sharpness.
Using the ▲/▼ buttons switches the noise reduction mode.
HIGH ó MID ó LOW
• This function only works for composite, s-video, component and
TM
HDMI signals (of 480i@60 or 576i@50 or 1080i@50/60).
Using the ▲/▼ buttons switches the color space mode.
AUTO ó RGB ó SMPTE240 ó REC709 ó REC601
• This item can only be selected with computer signals and
component video signals (except for signals from the LAN, USB
TYPE A and USB TYPE B ports and SCART RGB.)
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well with some signals. In this
case, it may be good to select a different mode than AUTO.
Using the ▲/▼ buttons switches the COMPONENT port functions.
COMPONENT ó SCART RGB
When SCART RGB is selected, the COMPONENT (Y, Cb/Pb, Cr/
Pr) and VIDEO ports will function as a SCART RGB port. A SCART
adapter or SCART cable is required for a SCART RGB input to the
projector. For details, contact your dealer.
Description