Item
SERVICE
(continued)
(continued on next page)
SERIAL SETTINGS
Select the CONTROL port serial communication
settings.
BAUD RATE
• When the COMMUNICATION TYPE is OFF
(72), the BAUD RATE is set to 19200bps and
PARITY is set NONE.
COMMUNICATION
TRANSMISSION METHOD
(continued)
Select the NETWORK BRIDGE communication
transmission method for the CONTROL port.
HALF-DUPLEX: This method allows the projector
FULL-DUPLEX: This method allows the projector
• HALF-DUPLEX is the default setting.
• If you select HALF-DUPLEX, check the
RESPONSE LIMIT TIME (74) setting.
Description
4800bps ó 9600bps ó 19200bps ó 38400bps
PARITY
NONE ó ODD ó EVEN
HALF-DUPLEX ó FULL-DUPLEX
to communicate both ways, but only in one
direction, either transmitting or receiving, at a
time.
to communicate both ways, transmitting and
receiving data simultaneously.
OPTION menu
73