Maintenance; Replacing The Lamp - InFocus IN5132 User Manual

Maintenance

Replacing the lamp

A lamp has a finite product life. Using the lamp for long periods of time could
cause the pictures to appear darker or the color tone to be poor. Note that each
lamp has a different lifetime, and some may rupture or burn out soon after you
start using them. We recommended that you keep a spare lamp on hand. Use the part
number below when speaking with your dealer.
Part number <IN5132, IN5134, IN5134a, IN5135>: SP-LAMP-080
Part number <IN5142, IN5144, IN5144a, IN5145>: SP-LAMP-081
Replacing the lamp
1.
Turn the projector off, and unplug the power cord. Allow
the projector to cool for at least 45 minutes.
2.
If the projector is ceiling mounted, or if the lamp has
broken, you can ask the dealer to replace the lamp
for you, if desired.
If you replace the lamp yourself, follow these instructions:
3.
Loosen the lamp cover screw (marked by arrow) and
then slide the lamp cover down and remove the cover.
4.
Loosen the 3 lamp screws (marked by arrows),
and slowly pull the lamp out by the handles. Never
loosen any other screws.
5.
Insert the new lamp, and re-tighten the 3 lamp
screws firmly to lock the lamp in place.
6.
Align the lamp cover with the projector and slide
the lamp cover back in place. Then firmly fasten
the lamp cover screw.
7.
Turn the projector on and reset the lamp time
using the LAMP TIME item in the OPTION menu.
(1) Press the MENU button to display a menu.
(2) Highlight the ADVANCED MENU in the menu using the ▼/▲
button, then press the ► button.
(3) Highlight OPTION in the left column of the menu using the
▼/▲button, then press the ► button.
(4) Highlight LAMP TIME using the ▼/▲ button, then press the ► button. A dialog will appear.
(5) Press the ► button to select OK on the dialog. The lamp time will be reset.
CAUTION
been removed.
NOTE
• Only reset the lamp time the lamp has been replaced in order to
maintain accurate lamp information.
108
►Do not touch the inside of the projector, when the lamp has
Maintenance
3
Lamp cover
Handles
4, 5
6