Video / Audio Menu - InFocus IN134UST User Manual

IN134UST/IN136UST User's Manual
Video Menu
Press the MENU button to open the OSD menu. Press the ◄► buttons to move to the Video menu.
Press the ▲▼ buttons to move up and down in the Video menu. Press ◄► to change setting values.
Note:
Available settings vary depending on the input source. Others will appear grayed out.
I
TEM
Video AGC
Video Saturation
Video Tint
Film Mode
Video Overscan
Closed Captioning
Reset
Audio
Note:
Video jagging may occur when playing interlace video. To overcome this issue, open the
Video menu and adjust the Film Mode feature.
Press the ◄► buttons to enable or disable the Automatic Gain Control for video
source.
Press the ◄► buttons to adjust the video saturation.
Press the ◄► buttons to adjust the video tint/hue.
Press the ◄► buttons to select a different film mode.
Press the ◄► buttons to enable or disable video over scan.
Press the ◄► buttons to enable or disable closed captioning.
Press (Enter) / ► to reset all settings to default values.
Press (Enter) / ► to o enter the Audio menu. See Audio on page 25.
D
ESCRIPTION
— 24 —