Security Menu - InFocus IN5132 User Manual

SECURITY menu

This projector is equipped with security functions.
From the SECURITY menu, you can perform the items
shown in the table below.
To use the SECURITY menu: User registration is required
before using the security functions.
Enter to the SECURITY menu
1. Press the ► button. The ENTER PASSWORD box will be displayed.
2. Use the ▲/▼/◄/► buttons to enter the password. The factory
default password is as follows.
IN5132, IN5142: 6007
IN5134, IN5134a, IN5144, IN5144a: 4407
IN5135, IN5145: 6107
This password can be changed
right side of the ENTER PASSWORD box and press the ► button to
display the SECURITY menu.
• We strongly recommend changing the factory default password as
soon as possible.
• If an incorrect password is entered, the ENTER PASSWORD box
will be displayed again. If an incorrect password is entered 3 times,
the projector will turn off. Afterwards the projector will turn off every
time an incorrect password is entered.
3. Items shown in the table below can be performed.
If you have forgotten your password
(1) While the ENTER PASSWORD box is displayed, press and hold the
RESET button on the remote control for about 3 seconds or press
and hold the INPUT button for 3 seconds while pressing the ►
button on the projector.
(2) A 10 digit Inquiring Code will be displayed. Contact your dealer with
the 10 digit Inquiring Code. Your password will be sent to you after
your user registration has been verified.
• If the Inquiring Code is displayed and no one operates the keys for approximately 55 seconds, the
menu will close. If necessary, repeat the process starting from item (1).
Item
SECURITY
PASSWORD
CHANGE
(continued on next page)
(below)
. Move the cursor to the
(1) Use the ▲/▼ buttons on the SECURITY menu
to select SECURITY PASSWORD CHANGE
and press the ► button to display the ENTER
NEW PASSWORD box.
(2) Use the ▲/▼/◄/► buttons to enter the new password.
(3) Move the cursor to the right side of the ENTER
NEW PASSWORD box and press the ► button
to display the NEW PASSWORD AGAIN box.
Enter the same password again.
(4) Move the cursor to the right side of the NEW
PASSWORD AGAIN box and press the ►
button and the NOTE NEW PASSWORD box
will be displayed for about 30 seconds. Write
down the password at this time.
Pressing the ENTER button on the remote control or ► button on the
projector will close the NOTE NEW PASSWORD box.
• Do not forget your password.
Description
SECURITY menu
87