Starting Usb Display - InFocus IN5132 User Manual

USB Display (continued)

Starting USB Display

Set the USB TYPE B to USB DISPLAY in the OPTION menu. When you connect
your computer to the projector's USB TYPE B port using a USB cable, the
projector will be recognized as a CD-ROM drive by your computer. The embedded
software, "LiveViewerLiteForUSB.exe", will run automatically and the application,
"LiveViewer Lite for USB", will be available on your computer for USB Display.
The application, "LiveViewer Lite for USB", will automatically close when the USB
cable is unplugged.
NOTE
• If the software does not start automatically (this typically happens
when the CD-ROM autorun function is disabled on your operating system),
follow the instructions below.
(1) Click on the toolbar [Start] button and select "Run"
(2) Enter F:\LiveViewerLiteForUSB.exe and then press the [OK]
If your CD-ROM drive is not drive F on your computer, you will need to
replace F with the correct drive letter assigned to your CD-ROM drive.
• CD-ROM autorun is disabled when the screensaver is running.
• When a password-protected screensaver is running, image transmissions from the
computer are suspended. To resume transmissions, exit the screensaver.
• Check our website for the latest software version and its manual.(User's
Manual (concise)). Follow the update instructions on the website.
Once this application starts, it will appear as an icon
in the Windows notification area. You can exit the
application from your computer by selecting QUIT
on the menu.
NOTE
• LiveViewer (refer to the Network
Guide) and this application cannot be used
simultaneously. If you connect your computer
to the projector using a USB cable while
LiveViewer is running, the following message will be displayed.
• Depending your computer's software, not all of the images on your computer
may be able to be transferred using "LiveViewer Lite for USB".
• If your computer has applications with firewall functions, disable the firewall
according to the user's manual.
• Some security software may block image transmission. Change the software
security settings to allow the use of "LiveViewer Lite for USB".
• If the audio input from USB TYPE B (57) is selected and the sound level is
still low despite maximizing the projector's volume level, check your computer
audio settings and raise the volume level accordingly.
Presentation tools
105