Page 1 Projector IN5132/IN5142/IN5134/IN5134a/ IN5144/IN5144a/IN5135/IN5145 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, read all manuals for this product. Be sure to read Safety Guide first. After reading them, store them in a safe place for future reference.
Page 2: Table Of Contents
Contents   Introduction . . . . . . . . . . . . . . . 3 Menu Items Features ..... . 3 EASY MENU .
Page 3: Introduction
Introduction Introduction Features The projector provides you with the following features: ü The HDMI ports can support a variety of digital image equipment providing you with clearer pictures. ü The extremely bright lamp and high quality optical system fulfills the demands of professional applications.
Page 4: Part Names
Introduction Part names Projector (1) Lamp cover (108) The lamp unit is inside. (2) Speakers (x2) (25, 57) (10) (3) Filter cover (110) The air filter and intake vent are inside. (4) Elevator feet (x2) (28) (5) Elevator buttons (x2) (28) (15) (6) Remote sensors (x2) (18, 71) (12)
Page 5: Control Panel And Indicators
Introduction Part names (continued) Control panel and Indicators (9) (10) (11) (12) (13) (14) (1) STANDBY/ON button (24) (2) INPUT button (26, 39) (3) MENU button (39) (4) LENS SHIFT button (29) (5) ZOOM button (29) (6) FOCUS - / + buttons (29) (7) SHUTTER button (36) (8) FUNCTION button (22, 29) (9) FILTER indicator (117)
Page 6 Introduction Part names (continued) Remote control (1) STANDBY button (24) (2) ON button (24) (3) ID - 1 / 2 / 3 / 4 buttons (17) (4) COMPUTER 1 button (26) (5) COMPUTER 2 button (26) (11) (10) (6) COMPUTER 3 button * (12) (13) (7) LAN button (26)
Page 7: Setting Up
Setting up Setting up Install the projector appropriately for your environment and mounting situation. When installing in a special application such as for ceiling mount application, additional mounting accessories (Specifications in the User’s Manual (concise)) and service may be required. Before installing the projector, contact your dealer about your application.
Page 8 Setting up Arrangement (continued) WARNING ►Install the projector where you can access the power outlet easily. If something unusual occurs, unplug the projector immediately. Otherwise a fire or electric shock may occur. ►Do not subject the projector to unstable conditions. If the projector falls or topples over, it could result in injury or damage the projector and other nearby items.
Page 9 Setting up Arrangement (continued) CAUTION ►Place the projector in a cool place with sufficient ventilation. The projector may shutdown automatically or may malfunction if its internal temperature is too high. • Using a damaged projector could result in a fire and an electric shock. •...
Page 10: Connecting Your Devices
Setting up Connecting your devices Before connecting the projector to a device, consult the device manual to confirm that the device is compatible with this projector and prepare the required accessories, such as appropriate cables. Contact your dealer when the required accessory did not come with the product or an accessory is damaged.
Page 11 Setting up Connecting your devices (continued) (57) (26) Computer (26) (26, 104) NOTE • Before connecting the projector to a computer, consult the computer’s manual and check the signal compatibility, synchronization methods and the display resolution output to the projector. - Some signals may need an adapter to input to this projector.
Page 12 Setting up Connecting your devices (continued) External (76) (19) Computer device Access point (76) wireless adapter (optional) (76) storage device (94, 104) WARNING ►Heat may build up in the USB wireless adapter. To avoid pos- sible burns, disconnect the projector power cord for 10 minutes before touching the adapter.
Page 13 Setting up Connecting your devices (continued) VCR/DVD/ (57) (26, 52) (26) Blu-ray Disc (26) player NOTE • The HDMI ports of this model are compatible with HDCP (High-band- width Digital Content Protection) and therefore capable of displaying video signals from HDCP compatible DVD players and the like. - The HDMI ports support the following signals: Video signal : 480i@60, 480p@60, 576i@50, 576p@50, 720p@50/60, 1080i@50/60, 1080p@50/60...
Page 14: Fastening The Cables
Setting up Connecting your devices (continued) Speakers Monitor (56) (with an amplifier) Another projector (Wired) Remote control NOTE • To use a wired remote control, connect a wired remote control to the REMOTE CONTROL IN port. You can also connect another projector to the REMOTE CONTROL OUT port to control it from the wired remote control.
Page 15: Fastening The Adapter Cover
Setting up Fastening the adapter cover When using the USB wireless adapter, be sure to connect the adapter to the USB TYPE A port furthest from the LAN port and use the supplied adapter cover. Loosen the screw (marked with a triangle) on the bottom left of the USB TYPE A ports.
Page 16: Connecting A Power Supply
Setting up Connecting a power supply Plug the power cord into the projector's AC AC IN IN (AC inlet). Power Firmly plug the power cord’s plug into a cord power outlet. After a few seconds, the POWER indicator will light steady orange. Remember that when the DIRECT POWER ON function activated (66), the power supply connection will make the projector turn on.
Page 17: Remote Control
Remote control Remote control Installing the batteries Insert batteries into the remote control before using it (batteries not included). If the remote control starts to malfunction, try replacing the batteries. If the remote control will not be used for a long period, remove the batteries from the remote control and store them in a safe place.
Page 18: Changing The Remote Control Signal Frequency
Remote control Changing the remote control signal frequency There are two choices to control the signal frequency mode of the remote control, Mode 1:NORMAL and Mode 2:HIGH. If the remote control does not function properly, try changing its mode. In order to set the Mode, press and hold the two button combination listed below for about 3 seconds.
Page 19: Simple Pc Mouse & Keyboard Control
Remote control Simple PC mouse & keyboard control When the projector’s USB TYPE B port and the computer’s type A USB port are connected and MOUSE is selected for the USB TYPE B item in the OPTION menu (67), the remote control will work like a simple PC mouse and keyboard.
Page 20: Status Monitor
Status Monitor <Only for IN5142, IN5144, IN5144a and IN5145> Status Monitor <IN5142, IN5144, IN5144a and IN5145 only> Status Monitor The Status Monitor is the LCD window on the rear panel of the IN5142, IN5144, IN5144a and IN5145. The Status Monitor displays the projector's present condition, including errors, setup information and error history.
Page 21 Status Monitor <Only for IN5142, IN5144, IN5144a and IN5145> Displaying the projector condition (continued) : When the lamp is on, it displays the supplied voltage and peripheral Celsius temperature. 3rd line NOTE • Nothing is displayed on the 2nd line of the monitor, when the projector is searching for an input signal and when the USB TYPE A ports are set to normal condition.
Page 22: Displaying The Log
Status Monitor <Only for IN5142, IN5144, IN5144a and IN5145> Displaying the log You can use the buttons to review the present setup information and the error history on the Status Monitor. NOTE • While the projector is warming up, button presses are ignored. •...
Page 23 Status Monitor <Only for IN5142, IN5144, IN5144a and IN5145> Displaying the log (continued) NOTE • The Status Monitor and its backlight will return to its previous state when any button (except the cursor buttons) is pressed and when no buttons are pressed for 30 seconds.
Page 24: Power On/Off
Power on/off POWER indicator Power on/off STANDBY button Turning on the power ON button Make sure the power cord is firmly and correctly connected to the projector and the outlet. Make sure the POWER indicator is steady orange (115). Then remove the lens cover.
Page 25: Operating
Operating Operating Adjusting the volume Use the VOL + / - buttons to adjust the volume. VOL + / - A dialog will appear on the screen to aid you in buttons adjusting the volume. If you do not do anything, the dialog will automatically disappear after a few seconds.
Page 26: Selecting An Input Signal
Operating Selecting an input signal Press the INPUT button on the projector. Each time you press the button, the projector switches its input port from the current port as per below. COMPUTER IN1  COMPUTER IN2  LAN INPUT button VIDEO USB TYPE A S-VIDEO...
Page 27: Selecting An Aspect Ratio
4:3  16:9  16:10  14:9  NATIVE  When there is no signal or an input signal from the LAN, USB TYPE A or USB TYPE B ports is being used: IN5132, IN5142: 4:3 (fixed) IN5134, IN5134a, IN5144, IN5144a, IN5135, IN5145: 16:10 (fixed) NOTE •...
Page 28: Adjusting The Projector's Elevator
Operating Adjusting the projector’s elevator When the projector surface is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. You can also tilt the projector using the feet to project at an appropriate angle to the screen, elevating the front side of the projector up to 9 degrees.
Page 29: Adjusting The Lens
Operating Adjusting the lens LENS SHIFT button Adjusting the zoom and focus ZOOM + / - buttons The ZOOM or FOCUS dialog will appear when you press any of the buttons from ZOOM, ZOOM -, ZOOM +, FOCUS + and FOCUS -. Use the ZOOM + / - buttons on the remote control or ZOOM button and ◄/►...
Page 30: Lens Memory
Operating Adjusting the lens (continued) Lens memory This projector is equipped with memory functions for lens adjustments (LENS SHIFT and LENS TYPE). Up to 3 sets of adjustments can be saved. To use the lens memory feature, press the POSITION or FUNCTION button while the LENS SHIFT dialog is FUNCTION displayed.
Page 31: Using The Automatic Adjustment Feature
Operating Using the automatic adjustment feature Press the AUTO button on the remote control. Pressing this button performs the following.  For a computer signal AUTO The vertical position, the horizontal position and the button horizontal phase will be automatically adjusted. Make sure the application window is set to its maximum size before to attempting to use this feature.
Page 32: Correcting The Distortion
Operating Correcting the distortion To correct the distortion of a projected image, you can select one of three options, AUTO, MANUAL and PERFECT FIT. First press the KEYSTONE button to display the KEYSTONE menu, and point at one of items with the ▲/▼ buttons. KEYSTONE AUTO: performs an automatic vertical keystone button...
Page 33 RESET button, and press the ENTER or INPUT button. Select one of the corners to be adjusted with the ▲/▼/◄► buttons and press the ENTER or INPUT button. IN5132, IN5142, IN5134, IN5134a, IN5144, and IN5144a only: the sides can also be adjusted. (continued on next page)
Page 34 ● To adjust a corner, use the ▲/▼/◄/► buttons to adjust the position of the corner. ● <Only for IN5132, IN5142, IN5134, IN5134a, IN5144 and IN5144a> To adjust the upper or lower side, use the ◄/► buttons to select any one point on the side, and use the ▲/▼...
Page 35: Using The Magnify Feature
Operating Using the magnify feature Press the MAGNIFY ON button on the remote MAGNIFY control. ON / OFF The picture will be magnified, and the MAGNIFY buttons dialog will appear on the screen. When the MAGNIFY ON button is pressed for the first time after the projector is turned on, the picture will be zoomed 1.5 times.
Page 36: Temporarily Freezing The Screen
Operating Temporarily freezing the screen Press the FREEZE button on the remote control. The “FREEZE” indicator will appear on the screen FREEZE (however, the indicator will not appear when OFF button is selected for the MESSAGE item in the SCREEN menu (61)).
Page 37: Pbyp
Operating PbyP (Picture by Picture) <Only for IN5134a, IN5144a, IN5135 and IN5145> PbyP is a function for displaying two different picture signals on a screen that is split into main and sub areas for each signal. main area area PbyP button Normal mode PbyP mode...
Page 38: Only For In5134A, In5144A, In5135 And
Operating PbyP (Picture by Picture) <Only for IN5134a, IN5144a, IN5135 and IN5145> (continued)  Changing the picture input signal Press any button to select an input port on the remote control or press the INPUT button on the control panel. A dialog box to select the input signal for the main area will be displayed.
Page 39: Using The Menu Function
Operating Using the menu function This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK, SECURITY and EASY MENU. EASY MENU consists of functions often used, and the other menus are classified into each purpose and brought together as the ADVANCED MENU. Each of these menus is operated using the same methods.
Page 40 Operating Using the menu function (continued) To close the MENU, press the MENU button again or select EXIT and press the ◄ cursor button or the ENTER button. Even if you do not do anything, the dialog will automatically disappear after about 30 seconds. NOTE •...
Page 41: Containing Items Of Each Menu
Operating Using the menu function (continued) Containing items of each menu The items contained in the menus are as per below; Menu Items ASPECT, AUTO KEYSTONE, KEYSTONE, KEYSTONE, EASY MENU (42) PERFECT FIT, PICTURE MODE, ECO MODE, INSTALLATION, RESET, FILTER TIME, LANGUAGE, ADVANCED MENU, EXIT BRIGHTNESS, CONTRAST, GAMMA, COLOR TEMP, COLOR, PICTURE (44) TINT, SHARPNESS, ACTIVE IRIS, MY MEMORY...
Page 42: Easy Menu
EASY MENU EASY MENU From the EASY MENU, you can perform the items shown in the table below. Select an item using the ▲/▼ cursor buttons. Then follow the instructions below. Item Description Using the ◄/► buttons switches the aspect ratio mode. ASPECT See the ASPECT item in IMAGE menu (47).
Page 43 EASY MENU Item Description GAMMA COLOR TEMP NORMAL 1 DEFAULT 2 MID CINEMA 2 DEFAULT 3 LOW DYNAMIC 3 DEFAULT 1 HIGH BOARD(BLACK) 4 DEFAULT 4 Hi-BRIGHT-1 BOARD(GREEN) 4 DEFAULT 5 Hi-BRIGHT-2 WHITEBOARD 5 DEFAULT 2 MID DAYTIME 6 DEFAULT 6 Hi-BRIGHT-3 DICOM SIM.
Page 44: Picture Menu
PICTURE menu PICTURE menu From the PICTURE menu, you can perform the items shown in the table below. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to perform this item. Then follow the instructions below. Item Description Using the ◄/►...
Page 45 PICTURE menu Item Description Using the ▲/▼ buttons switches the color temperature mode. 1 HIGH 1 CUSTOM 2 MID 2 CUSTOM 3 LOW 3 CUSTOM      6 CUSTOM 4 Hi-BRIGHT-1 5 Hi-BRIGHT-2 6 Hi-BRIGHT-3 5 CUSTOM 4 CUSTOM ...
Page 46 PICTURE menu Item Description Using the ◄/► buttons adjusts the sharpness. Weak ó Strong SHARPNESS • There may be some noise and/or the screen may flicker for a moment when an adjustment is made. This is not a malfunction. Using the ▲/▼ cursor buttons changes the active iris control mode. PRESENTATION ó...
Page 47: Image Menu
For an input signal from the LAN, USB TYPE A or USB TYPE B ports, or if there is no signal IN5132, IN5142: 4:3 (fixed) IN5134, IN5134a, IN5144, IN5144a, IN5135, IN5145: 16:10 (fixed) • The NORMAL mode keeps the original aspect ratio of the signal.
Page 48 IMAGE menu Item Description Using the ◄/► buttons adjusts the over-scan ratio. Small (magnifies picture) ó Large (reduces picture) • This item can only be selected for a video, s-video and component video signal. • For an HDMI signal, this item can also be selected if either (1) or OVER SCAN (2) applies.
Page 49 IMAGE menu Item Description Using the ◄/► buttons adjusts the horizontal phase to eliminate flicker. Right ó Left H PHASE • This item can only be selected for a computer signal or a component video signal. This function is unavailable with LAN, USB TYPE A / B or HDMI 1 / 2 port signals.
Page 50: Input Menu
INPUT menu INPUT menu From the INPUT menu, you can perform the items shown in the table below. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to perform this item. Then follow the instructions below. Item Description Using the ▲/▼...
Page 51 INPUT menu Item Description You can choose the video format for the S-VIDEO and VIDEO ports. (1) Use the ▲/▼ buttons to select the input port. (2) Using the ◄/► buttons switches the video format mode. AUTO ó NTSC ó PAL ó SECAM VIDEO FORMAT N-PAL ó...
Page 52 INPUT menu Item Description The computer input signal type for COMPUTER IN1 and IN2 ports can be chosen. (1) Use the ▲/▼ buttons to select the COMPUTER IN port to be set. (2) Use the ◄/► buttons to select the computer input signal type. AUTO ó...
Page 53 INPUT menu Item Description The resolution for the COMPUTER IN1 and COMPUTER IN2 input signals can be chosen on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed.
Page 54: Setup Menu
SETUP menu SETUP menu From the SETUP menu, you can perform the items shown in the table below. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to perform this item. Then follow the instructions below. Item Description Selecting this item performs the Automatic Keystone distortion...
Page 55 SETUP menu Item Description Using the ◄/► buttons corrects the horizontal keystone distortion. Shrink the right of the image ó Shrink the left of the image • The adjustable range of this function will vary among inputs. For some inputs, this function may not work well. KEYSTONE •...
Page 56 Select OFF to disable the MONITOR OUT port for the input port or standby mode chosen in the step (1). • <IN5132, IN5142, IN5134, IN5134a, IN5144, IN5144a only> You cannot select COMPUTER IN1 or COMPUTER IN2 for step (1) or step (2).
Page 57: Audio Menu
AUDIO menu AUDIO menu From the AUDIO menu, you can perform the items shown in the table below. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to perform this item. Then follow the instructions below.
Page 58 AUDIO menu Item Description The HDMI audio mode for the HDMI 1 and 2 ports can be chosen. (1) Use the ▲/▼ buttons to select the HDMI port to be set. HDMI AUDIO (2) Use the ◄/►buttons to select the mode of HDMI audio.
Page 59: Screen Menu
SCREEN menu SCREEN menu From the SCREEN menu, you can perform the items shown in the table below. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to perform this item. Then follow the instructions below. Item Description Using the ▲/▼/◄/►...
Page 60 SCREEN menu Item Description This item allows you to capture a personal MyScreen image which can be used as the BLANK or START UP screen. Display the image you want to capture before accomplishing the following steps. (1) Selecting this item displays a dialog titled “MyScreen”.
Page 61 SCREEN menu Item Description Using the ▲/▼ buttons turns on/off the MyScreen lock function. ON ó OFF When ON is selected, the item MyScreen is locked. Use this MyScreen Lock function for protecting the current MyScreen. • This function cannot be selected when ON is selected to the MyScreen PASSWORD item in SECURITY menu (88).
Page 62 SCREEN menu Item Description Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► or ENTER button. The SOURCE NAME menu will be displayed. (2) Use the ▲/▼...
Page 63 SCREEN menu Item Description (6) The current name will be displayed on the first line. Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter characters. To erase 1 character at a time, press the RESET button or press the ◄...
Page 64 SCREEN menu Item Description C.C. displays a transcript or dialog of the audio portion of videos, files and other presentations, including relevant sounds. An NTSC format video or a 480i@60 format component video source supporting closed captioning is required to use this function. Depending on the signal source and the equipment being used, this function may not work properly.
Page 65: Option Menu
OPTION menu OPTION menu From the OPTION menu, you can perform the items shown in the table below. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to perform this item, except items LAMP TIME and FILTER TIME.
Page 66 OPTION menu Item Description Using the ▲/▼ buttons turns the DIRECT POWER ON function on/ off, ON ó OFF When this function is ON, the lamp inside the projector will automatically DIRECT POWER turn on when the projector is supplied with power instead of following the usual procedure (24).
Page 67 OPTION menu Item Description Using the ▲/▼ buttons selects the function of USB TYPE B port. To use this function, you need to connect the projector's USB TYPE B port to the computer's Type A USB port. MOUSE ó USB DISPLAY MOUSE: The remote control works like a simple mouse and keyboard for the computer.
Page 68 OPTION menu Item Description This item assigns one of the following functions to MY BUTTON (1 to 4) on the remote control (6). (1) Use the ▲/▼ buttons on the MY BUTTON menu to select a button from MY BUTTON - 1 to 4 and press the ► or ENTER button to display the MY BUTTON setup dialog.
Page 69 OPTION menu Item Description Select this to display the SERVICE menu. Select an item using the ▲/▼ buttons, and press the ► button or the ENTER button on the remote control to perform this item. ALTITUDE Using the ▲/▼ buttons switches the rotation speed of the cooling fans.
Page 70 FILTER MESSAGE Use the ▲/▼ button to set the notification timer for displaying a message to replace the filter unit IN5132, IN5134, IN5134a, IN5135: 1000h ó 2000h ó 5000h ó 10000h ó 15000h ó OFF IN5142, IN5144, IN5144a, IN5145: 1000h ó 2000h ó 5000h ó 10000h ó 15000h ó 20000h ó OFF After choosing any item except OFF, the message “REMINDER...
Page 71 OPTION menu Item Description KEY LOCK (1) Use the ▲/▼ buttons to choose the control option. CONTROL PANEL ó REMOTE CONTROL (2) Use the ◄/► buttons to select ON or OFF. ON ó OFF Selecting ON in Step 2 locks all the buttons except STANDBY, ON and STANDBY/ON for the control option selected in Step 1.
Page 72 OPTION menu Item Description Selecting this item displays COMMUNICATION menu. In this menu, you can configure the projector's serial communication settings using the CONTROL port. • Select an item using the cursor buttons ▲/▼. Then press the ► button to open the submenu for setting the item you selected.
Page 73 OPTION menu Item Description SERIAL SETTINGS Select the CONTROL port serial communication settings. BAUD RATE 4800bps ó 9600bps ó 19200bps ó 38400bps PARITY NONE ó ODD ó EVEN • When the COMMUNICATION TYPE is OFF (72), the BAUD RATE is set to 19200bps and PARITY is set NONE.
Page 74 OPTION menu Item Description RESPONSE LIMIT TIME Select the time period which the projector should wait to receive response data from a device communicating using the NETWORK BRIDGE and HALF-DUPLEX methods via the CONTROL port. OFF ó 1s ó 2s ó 3s OFF: Select this mode if the responses from the device do not need to be monitored.
Page 75 OPTION menu Item Description INFORMATION Selecting this item displays a dialog titled “INPUT_INFORMATION”. It shows information about the current input. • The “FRAME LOCK” message on the dialog means the frame lock function is working. • The “SCART RGB” message means the COMPONENT ports are working as a SCART RGB input port.
Page 76: Network Menu
NETWORK menu NETWORK menu Remember that incorrect network settings on this projector may cause network problems. Contact your network administrator before connecting to an existing access point on the network. Select “NETWORK” from the main menu to access the following functions. Select an item using the ▲/▼...
Page 77 NETWORK menu Item Description Use the ▲/▼ buttons to turn DHCP on/off. ON ó OFF Select OFF when the network does not have DHCP DHCP enabled. To save the setting, press the ► button. (Dynamic Host Configuration • When DHCP changes to ON, it takes a little time Protocol) to obtain the IP address from DHCP server.
Page 78 NETWORK menu Item Description Use the ▲/▼/◄/► buttons to enter the Year (last two digits), Month, Date, Hours and Minutes. • When this item is set, TIME DIFFERENCE in the WIRED SETUP menu will be overwritten with the same setting (82). •...
Page 79 NETWORK menu Item Description Use the ▲/▼ buttons to select the SSID to display the SSID menu. #1 DEFAULT ó #2 DEFAULT ó #3 DEFAULT #5 CUSTOM ó #4 DEFAULT Select DEFAULT (#1~#4) and press ► or the ENTER button. To adjust CUSTOM Press the ►...
Page 80 NETWORK menu Item Description Select this to display the WIRELESS INFORMATION dialog to view the wireless LAN settings. Use the ▲/▼ buttons to switch the page. The first page shows the wireless LAN settings. The second and subsequent pages display the wireless LAN connection devices signal information WIRELESS •...
Page 81 NETWORK menu Item Description Select this to display the WIRED SETUP menu for the wired LAN. Use the ▲/▼ buttons to select an item, and the ► or ENTER button on the remote control to perform the item. Use the ▲/▼ buttons to turn DHCP on/off. ON ó...
Page 82 NETWORK menu Item Description Use the ▲/▼ buttons to enter the TIME DIFFERENCE. Set the TIME DIFFERENCE to match your computer. If you are unsure what to enter, contact your IT manager. TIME Use the ► button to return to the menu after DIFFERENCE setting TIME DIFFERENCE.
Page 83 NETWORK menu Item Description (1) Use the ▲/▼ buttons on the NETWORK menu to select the PROJECTOR NAME and press the ► button. The PROJECTOR NAME dialog will be displayed. (2) The current PROJECTOR NAME will be displayed on the first 3 lines.
Page 84 Use the application to transfer the image data. It can be downloaded from the InFocus website. (www.infocus.com/support). Use the ▲/▼ buttons to select a still MY IMAGE image (4. My Image Function in the Network Guide) and the ► or ENTER button to display the image.
Page 85 It can be installed from the bundled application CD. You can also download the latest version and relevant information from the InFocus website (www.infocus.com/support). For more details about Network Presentation and instructions to install the LiveViewer, refer to the LiveViewer manual.
Page 86 SECURITY menu Item Description • To change from Single PC mode to Multi PC mode, press ► button to choose OK in the dialog and press the ENTER or INPUT button. The display mode will change. • For details on how to switch the display mode to Multi PC mode on your computer, refer to the LiveViewer manual.
Page 87: Security Menu
1. Press the ► button. The ENTER PASSWORD box will be displayed. 2. Use the ▲/▼/◄/► buttons to enter the password. The factory default password is as follows. IN5132, IN5142: 6007 IN5134, IN5134a, IN5144, IN5144a: 4407 IN5135, IN5145: 6107 (below) This password can be changed .
Page 88 SECURITY menu Item Description The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the current MyScreen image from being overwritten. 1 Turning on the MyScreen PASSWORD 1-1 Use the ▲/▼ buttons on the SECURITY menu to select MyScreen PASSWORD and press the ►...
Page 89 SECURITY menu Item Description PIN LOCK is a function which prevents the projector from being used unless a registered Code is entered. 1 Turning on the PIN LOCK 1-1 Use the ▲/▼ buttons on the SECURITY menu to select PIN LOCK and press the ► button or the ENTER button to display the PIN LOCK on/off menu.
Page 90 SECURITY menu Item Description If this function is ON and the projector's vertical angle or INSTALLATION setting is different from the previous recorded setting, the TRANSITION DETECTOR ON alarm will be displayed instead of an input signal. • To display the input signal again, turn this function OFF. •...
Page 91 SECURITY menu Item Description The MY TEXT PASSWORD function can prevent the MY TEXT from being overwritten. When the password is set for the MY TEXT; • The MY TEXT DISPLAY menu will be unavailable, which can prohibit changing the DISPLAY setting. •...
Page 92 SECURITY menu Item Description (1) Use the ▲/▼ buttons on the SECURITY menu to select the MY TEXT DISPLAY and press the ► or ENTER button to display the MY TEXT DISPLAY on/off menu. (2) Use the ▲/▼ buttons on the MY TEXT DISPLAY on/off menu to select on or off.
Page 93 SECURITY menu Item Description Select this to display the SECURITY INDICATOR dialog. Use the ▲/▼ buttons to select ON or OFF. SECURITY ON ó OFF INDICATOR When PIN LOCK or TRANSITION DETECTOR is ON and this is turned ON, the SECURITY indicator blinks yellow in the standby mode (89, 90).
Page 94: Presentation Tools
Presentation tools Presentation tools The projector has the following convenient tools that enable on-screen presentations easily and quickly: - PC-LESS Presentation (below) - USB Display (104) - Network Presentation For more details about Network Presentation, refer to the Network Guide and the LiveViewer manual.
Page 95: Thumbnail Mode
NOTE • Files with a resolution larger than the following are not supported. IN5132, IN5142: 1024 x 768 (Still), 768 x 576 (Movie) IN5134, IN5134a, IN5144, IN5144a: 1280 x 800 (Still), 768 x 576 (Movie) IN5135, IN5145: 1920 x 1200 (Still), 768 x 576 (Movie) (* Some computers may not support these resolutions.)
Page 96: Button Operation
Presentation tools PC-LESS Presentation (continued) Button Operation You can control the images on the Thumbnail screen with the remote control, control panel or Web Remote Control. The following functions can be supported while the Thumbnail screen is displayed. Button operation Functions Web Remote Remote...
Page 97 Presentation tools PC-LESS Presentation (continued) Thumbnail Menu Operation You can also control the images by using the Thumbnail screen menu. Item Functions Moves to an upper folder. SORT Allows you to sort files and folders as following. Press the ► cursor button or ENTER to return to the Thumbnail RETURN screen.
Page 98 Presentation tools PC-LESS Presentation (continued) NOTE • These operations are not accessible when the projector OSD is displayed. • The Thumbnail mode is able to display up to 20 files in a page. • When a Thumbnail screen, Slideshow, or Full Screen image is displayed, you cannot change the input port using the INPUT button.
Page 99: Full Screen Mode
Presentation tools PC-LESS Presentation (continued) Full Screen Mode The Full Screen mode shows a full display image. To display in Full Screen mode, select an image in the Thumbnail screen. Then press the ENTER button on the remote control, the INPUT button on the control panel or click [ENTER] on the Web Remote Control.
Page 100 Presentation tools PC-LESS Presentation (continued) Operations for movie When a movie is playing in Full Screen mode, you can press one of the cursor buttons, the ENTER or the INPUT button on the remote control, control panel or Web Remote Control to display a remote control icon and progress bar. The following operations are available when the remote control icon and progress bar are displayed.
Page 101: Slideshow Mode, Playlist
Presentation tools PC-LESS Presentation (continued) Slideshow Mode The Slideshow mode displays images in full screen and changes the images based on the timing chosen in INTERVAL on the Thumbnail menu (97). You can start this function from the Slideshow menu. To display the Slideshow menu, select the SLIDESHOW button in the Thumbnail menu and press the ENTER button on the remote control or INPUT button on the control panel, or click [ENTER] on the Web Remote Control.
Page 102 Presentation tools PC-LESS Presentation (continued) Operating by SLIDESHOW in the Thumbnail menu You can customize your Slideshow. Configure the SLIDESHOW item in the Thumbnail menu (97). Item Functions SLIDESHOW RETURN Returns to the Thumbnail mode. PLAY Play the Slideshow. START Sets the beginning Slideshow slide STOP Sets the ending Slideshow slide.
Page 103 Presentation tools PC-LESS Presentation (continued) Playlist The Playlist is a DOS format text file, which decides the order to display still image files in the Thumbnail mode or in Slideshow. The playlist file name is playlist.txt and it can be edited on a computer. When a PC-LESS Presentation is started or a Slideshow is configured, the file is created in a folder that contains the selected image files.
Page 104: Usb Display
IN5132, IN5142: 1024 x 768 (XGA) The other models: 1280 x 800 Even if the native projector resolution is higher than above, the transferred image will be displayed in the smaller resolution.
Page 105: Starting Usb Display
Presentation tools USB Display (continued) Starting USB Display Set the USB TYPE B to USB DISPLAY in the OPTION menu. When you connect your computer to the projector's USB TYPE B port using a USB cable, the projector will be recognized as a CD-ROM drive by your computer. The embedded software, “LiveViewerLiteForUSB.exe”, will run automatically and the application, “LiveViewer Lite for USB”, will be available on your computer for USB Display.
Page 106 Presentation tools USB Display (continued) Right-Click menu The menu shown on the right is displayed when you right-click the application icon in the Windows notification area. Display : A floating menu is displayed, and the icon disappears from the Windows notification area.
Page 107: Options Window
If you remove the checkmark in the [Keep PC resolution] box, your computer's screen resolution will change as per below and your display speed may be faster. IN5132, IN5142: 1024 x 768 (XGA) The other models: 1280 x 800 If your computer does not support the display resolution specified above, then the the largest compatible resolution will be selected.
Page 108: Maintenance
We recommended that you keep a spare lamp on hand. Use the part number below when speaking with your dealer. Part number <IN5132, IN5134, IN5134a, IN5135>: SP-LAMP-080 Part number <IN5142, IN5144, IN5144a, IN5145>: SP-LAMP-081 Replacing the lamp Turn the projector off, and unplug the power cord.
Page 109: Lamp Warning
Maintenance Replacing the lamp (continued) Lamp warning HIGH TEMPERATURE HIGH PRESSURE HIGH VOLTAGE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp may burn out or rupture with a loud bang if the lamp is jolted or scratched, handled while hot, or worn over time.
Page 110: Cleaning And Replacing The Air Filter
When purchasing a new filter from your dealer, request a filter unit with the following part number: Part number <IN5132, IN5134, IN5134a, IN5135>: SP-FILTER-02 Part number <IN5142, IN5144, IN5144a, IN5145>: SP-FILTER-03 Turn the projector off, and unplug the power cord.
Page 111 Maintenance Cleaning and replacing the air filter (continued) Put the filter cover back into the place. Turn the projector on and reset FILTER TIME in the EASY MENU. (1) Press the MENU button to display a menu. (2) Highlight FILTER TIME using the ▲/▼ cursor buttons, then press the ► cursor (or the ENTER / the RESET) button.
Page 112: Other Care
Maintenance Other care Inside of the projector In order to ensure the safe use of your projector, have it cleaned and inspected by your dealer annually. Caring for the lens If the lens is damaged, soiled or foggy, it could affect the image display quality. Take care of the lens.
Page 113: Troubleshooting
Troubleshooting Troubleshooting If something unusual happens, stop using the projector immediately. WARNING ►Never use the projector if something unusual is observed Troubleshooting such as smoke, a strange odor, excessive sound, damage to the projector or its accessories, liquids or foreign matter have gotten into the projector, etc. In such cases, immediately disconnect the power plug from the power outlet.
Page 114 • Are the vents blocked? • Is the air filter dirty? • Does the peripheral temperature exceed 45°C? • If you are using a IN5132, IN5134, IN5134a or IN5135, does the peripheral temperature exceed 40°C? • Is the ALTITUDE setting appropriate? For more details about ALTITUDE, refer to ALTITUDE in the SERVICE submenu of the OPTION menu (69).
Page 115: Regarding The Indicator Lamps
Solid • Is the air filter dirty? • Does the peripheral temperature exceed 45°C? • If you are using an IN5132, IN5134, IN5134a or IN5135, does the peripheral temperature exceed 40°C? If indicators are doing the same thing, change the lamp according to section Replacing the lamp.
Page 116 • Is the air filter dirty? Solid • Does the peripheral temperature exceed 45°C? Solid • If you are using the IN5132, IN5134, IN5134a or IN5135, does the peripheral temperature exceed 40°C? • Is the ALTITUDE setting appropriate? For ALTITUDE details, refer to ALTITUDE of SERVICE in the OPTION menu (69).
Page 117: Resetting All Settings
Troubleshooting Regarding the indicator lamps (continued) NOTE • When the inside of the projector becomes overheated, the projector will automatically shut down (for safety purposes) and the indicator lamps may also be turned off. In this case, disconnect the power cord, and wait at least 45 minutes.
Page 118: Situations That May Be Easily Mistaken For Machine Defects
Troubleshooting Problems that can be easily mistaken for machine defects Before assuming that the projector needs repair, review the following troubleshooting tips: Reference Situation Troubleshooting tips page The electrical power cord is unplugged. Connect the power cord correctly. The main power source was interrupted (for example a power outage (blackout), etc.).
Page 119 Troubleshooting Problems that can be easily mistaken for machine defects (continued) Reference Situation Troubleshooting tips page The projector does not recognize the USB storage device inserted into USB TYPE A ports. No sounds or Select REMOVE USB and then remove the USB storage pictures are device.
Page 120 Troubleshooting Problems that can be easily mistaken for machine defects (continued) Reference Situation Troubleshooting tips page The batteries in the remote control are almost dead. Replace the batteries. The ID numbers set in the projector and the remote The remote control are different.
Page 121 Troubleshooting Problems that can be easily mistaken for machine defects (continued) Reference Situation Troubleshooting tips page When the projector is operating in Eco mode, flickering may appear on screen. Set ECO MODE to NORMAL, and set AUTO ECO Some kind MODE to OFF, in the SETUP menu.
Page 122 Troubleshooting Problems that can be easily mistaken for machine defects (continued) Reference Situation Troubleshooting tips page The NETWORK BRIDGE function is turned off. NETWORK BRIDGE Set COMMUNICATION TYPE to NETWORK BRIDGE in function does the OPTION - SERVICE - COMMUNICATION menu. not work The SAVING function is working.
Page 123: Specifications
Specifications Specifications See Specifications in the User’s Manual (concise). End User License Agreement for the Projector Software • The projector software contains several independent software modules and there are copyright or/and third party copyrights for each of these software modules. •...

This manual is also suitable for:

In5142 In5134 In5134a In5144 In5144a In5135 ... Show all

InFocus IN5132 User Manual

Introduction

Setting up

Remote Control

Status Monitor

Power On/Off

Operating

Easy Menu

PICTURE Menu

IMAGE Menu

INPUT Menu

SETUP Menu

AUDIO Menu

SCREEN Menu

OPTION Menu

NETWORK Menu

SECURITY Menu

Presentation Tools

Maintenance

Troubleshooting

Specifications

Quick Links

Related Manuals for InFocus IN5132

Summary of Contents for InFocus IN5132

This manual is also suitable for:

Table of Contents